Installing a bidet, the main stages of work for different types of models

More and more useful plumbing fixtures are appearing, the installation of which not everyone is familiar with. Installing a bidet can be done with your own hands, but a number of rules must be followed. There are several ways to fix and connect a plumbing fixture, from which you choose the one that suits the type of fixture.

Electronic bidet design

Connecting a shower toilet

The device combines the characteristics of 2 plumbing fixtures. It is well suited for placement in small sanitary rooms. The bidet is installed like a simple toilet. The only difference is the need for hot water supply. They cut into the corresponding pipe in a simple way.

The device must be connected to the cold water supply system at the connection point with the pipe supplying water to the tank. Here an adapter is installed, to the taps of which the faucet of the sanitary fixture is screwed. Electric models are connected to a separate outlet, which is hidden.

Need for additional plumbing

Previously, plumbing was the same for everyone, it had its own clear place in the room and could not leave it. However, now even in apartments, not to mention large private houses, they make a couple of bathrooms, expand these rooms, and install a bidet in addition to the toilet. This is hygiene, health, plus an attractive interior element for the bathroom.

Actually, not only personal hygiene, the desire of a person to maintain cleanliness has led to a real boom in the bidet market. Also, installing a bidet is due to the fact that with its help, water is used rationally, time is saved, and the need to take a shower is eliminated. That is, the bidet significantly helps in life, in maintaining the modern fast pace.

Caring parents, through the use of additional plumbing fixtures, help their children from an early age develop an understanding of what personal hygiene means, how important it is to observe it, and what role it plays in life.

Installation of mixer and siphon

The base of the bidet is equipped with holes for connecting plumbing fixtures. The mixer is installed as follows:

1. The studs of the device are equipped with gaskets. Seals are included in the delivery set.
2. The mixer is placed in a specially designated place. The pins are immersed in holes located on the bidet body. Gaskets and metal washers are placed on protruding parts.
3. The mixer is secured with nuts. Fasteners are tightened using medium force. If parts of the bidet interfere with the adjustable wrench, you will need to use a socket tool.
4. Before fixing the bidet, the mixer pipes are connected to the taps of the water pipe. The gasket is already installed, so there is no need to use sealing tape or tow. Do not over-tighten flexible hose couplings. This causes damage to the gasket. Parts that are not resistant to damage can be protected with paronite seals.

The siphon is not always included in the bidet kit. Sometimes the drainage device has to be purchased separately. In this case, pay attention to the presence of a pipe for connecting the overflow part. The DIY siphon connection diagram includes the following steps:

1. Installation of the bottom valve. The part is used to open the drain hole after turning on the mixer. Install the device instead of the siphon protective grille. The valve control lever with a cable is connected to the mixer. If such a part is missing, the drain grate is treated with silicone and installed using a gasket.
2. Siphon neck connection. This part of the system is screwed to the grill using a bolt with a ring.
3. Connecting the drainage hose. The corrugated tube is fixed with a nut.

   
   Siphon assembly process

4. Connecting the overflow hose. The corresponding opening of the bidet is equipped with a grill. A seal is placed between it and the body of the device. One end of the overflow hose is connected to the overflow grid, the other to the siphon pipe.

Design Features

The appearance of the hygienic device is practically no different from the well-known standard shower. Both of them consist of:

• mixer;
• flexible hose;
• watering cans.

But the purpose of the device still causes some differences. There is no need for a large, diffuse stream of water, so select a small-sized mixer with a focused, gentle flow without splashing.

Some models of such showers are equipped with a thermostat to automatically regulate the comfortable temperature of the water stream. Once the thermostat is adjusted immediately after installing the shower, it will ensure that the set temperature is maintained throughout its entire lifespan.

A type of hygienic shower for the toilet Source ozonsanteh.ru

This element will protect you from possible unpleasant sensations when coming into contact with too hot or cold water.

The main difference is that the water from the switched-on hygienic shower does not flow until a special flow control button is pressed, and the pressure is adjusted using a special mixer lever.

Mounting to floor, wall

The bidet is installed next to the toilet. Space is left in front of the device body. After choosing a location, proceed to perform the following actions:

1. The base of the floor device is circled, marking the mounting points. The bidet is turned on its side, after which a gasket is made of flexible material.
2. In the floor, according to the markings made, holes are drilled, the diameter of which coincides with the dimensions of the dowels. When drilling tiles, use a spear drill.
3. After removing construction debris, fastening sleeves are inserted into the holes. The gasket is aligned with the contour marked on the floor. Both sides of the seal are treated with sealant.
4. The housing is screwed using dowels or bolts.

The process of attaching the bidet to the floor
The process of installing a hanging bidet includes the following steps:

1. Bracket assembly. The frame is equipped with adjustable legs. A sewer pipe outlet with an adapter is inserted into a special holder.
2. Preparing the frame. The bracket is given the desired position, aligning it horizontally and vertically. The legs are twisted so that the bidet is at a distance of 35-40 cm from the floor.
3. Performing markings. The places where fasteners are inserted are marked on the wall. After this, holes are drilled according to the markings.
4. Screwing the bracket. The assembled and leveled frame is secured with dowels. The sewer pipe outlet is connected to the general system.
5. Connection to water supply. Flexible hoses must not be used when placing pendant appliances. All connections must be as tight as possible. Valves are screwed to the pipes, after which water is supplied. Connections are inspected for leaks.
6. Installation of a partition. Studs are screwed into the frame and equipped with protective bushings. All outlets are passed through the plasterboard wall. The bidet is placed on pins and secured with nuts.

A little about the device

If there is enough space in an apartment or house, they buy a toilet, and next to it - a bidet, from the same series. It is more convenient than a toilet in that you can regulate the water pressure and its direction yourself. There is a toilet with a bidet, but for convenience it is better to take both products separately from each other.

Manufacturers today offer two types of bidets - one that is installed on the floor, and a more modern one - a hanging one, which is attached to the wall. Both are equally convenient to use. Bidets are made from a variety of materials - from steel to gold. But the most popular are the classic options made from sanitary ware and porcelain. The same goes for color. Manufacturers create bidets in a variety of colors. But consumers prefer white.

Bidet drain

When using a plumbing fixture, water may spill onto the floor. To prevent emergency situations, a drain is formed that resembles the one installed in public places. The installation diagram includes the following steps:

1. Preparing the floor. Remove the facing material and cement screed. The concrete base is covered with waterproofing material.
2. Installation of the ladder. A drainage tray in the form of a funnel with a siphon is placed in a pre-selected area.
3. Floor insulation. Foam sheets are laid on top of the waterproofing layer. The ladder must be tightly covered with material, for which grooves are formed in the sheets.
4. Pouring concrete screed. The base is covered with plastic film. The solution is laid out so that it covers the bottom of the flange.
5. Laying roofing felt. A hole is cut in the canvas, the diameter of which corresponds to the size of the ladder. The fasteners should be hidden under the roofing felt. After this, holes for the bolts are formed.

After installing the upper part of the drain, a finishing screed is formed, and tiles are laid on the layer of glue.

Video description

The process of installing a built-in hygienic shower can be viewed here:
This method is more problematic and has many disadvantages:

• the possibility of installation is not always possible and is determined by the presence of ventilation shafts, the thickness of the walls, etc.;
• control of water shutoff is difficult (if the water supply is not shut off, it can lead to a leak);
• there is a possibility of heated water mixing with cold water (this will affect not only the owner of the shower, the neighbors will also feel it). It is recommended to purchase a device containing a built-in check valve or install such a valve separately;
• there are no built-in models with thermostat adjustment on the platform (the temperature control device is usually adjusted once and hidden behind the wall);
• In the absence of a thermostat, the water temperature control is located above the toilet. This means you need to choose the right toilet model, which has an elongated bowl shape.

Advantages of the installation system

The frame system, equipped with pipe bends and control elements, allows not only to save maximum space in the bathroom, but also has the following advantages:

• Makes the location of the plumbing fixture very comfortable. For installation of the installation, you need to allocate a small space near the wall.
• Allows you to optimize space. An ergonomic and compact bidet, mounted on the wall, occupies a minimum usable area, therefore it is optimal for installation in small bathrooms.
• Facilitates the maintenance of plumbing fixtures. The hanging device is accessible for washing from any side, and the floor area under the device always remains free, which makes cleaning the bathroom easier.
• Characterized by safety of use. The metal frame, which is the main structural element of any installation, is capable of withstanding significant loads, in the range of 300-400 kg.
• It is reliable and durable. Proper installation of the bidet bowl, installation frame and decorative screen guarantees high strength without compromising functionality during operation.

Bidet installation

It should be noted that all popular domestic and foreign manufacturers necessarily complete their products with detailed instructions and schematic drawings, so independent installation of the installation and plumbing fixture does not cause difficulties even in the absence of experience.

The main disadvantages of the installation include the need to dismantle the protective screen to carry out repairs, as well as the fairly high cost of high-quality suspended plumbing kits.

Manufacturers of the best showers for bathrooms

There are quite a lot of products for this purpose in stores and it is very difficult to figure out which one is better. Therefore, professionals recommend giving preference to products from world-famous companies. There are not so many such manufacturers. Based on user reviews and product popularity, the most popular brands are listed below:

• Hansgrohe;
• Damixa;
• Grohe;
• Geberit.

Hygienic shower set TM Grohe Source kaplya.com.ua
Products from these manufacturers will be guaranteed to be of high quality and comfortable, however, the cost of such faucets will be appropriate. But many experts are sure that saving in such a matter is inappropriate. Purchasing a cheaper and lower quality device, as a rule, leads to its faster breakdown and forced costs for its replacement and payment for related work. Therefore, the quality of the purchased plumbing fixtures should directly depend on the complexity of the installation work being carried out. It will be quite expensive to replace a leaky gasket or broken thread when the product is installed built-in.

In order not to become a victim of deception and not to purchase counterfeit goods, it is recommended to purchase plumbing fixtures in salons with a good reputation and with the obligatory presence of the necessary quality certificates for the products offered.

It must be remembered that high-quality products are not made from cheap materials, and their price will be appropriate.

Mixer for bidet with hygienic shower Source sanusel.ru

Recommendations for use

The bidet is used for the following purposes:

• The device helps you regularly maintain personal hygiene after visiting the toilet.
• Giving up toilet paper is beneficial from a medical point of view: it helps to avoid diseases of the genitourinary system, and a bidet is also necessary for patients suffering from hemorrhoidal inflammation (prevents injuries and worsening of the condition).
• The device is suitable not only for hygiene of intimate places, but also for washing the feet.
• Plumbing helps you save on purchasing a bath for your baby.
• The design is convenient for older people who, due to their condition, are unable to fully take a shower or bath.

A bidet is an excellent device that is valuable for people who care about personal hygiene. This plumbing device also helps to monitor your health. The design is simple and uncomplicated, so it fits into any bathroom interior.

Video description

The specifics and advantages of hygienic shower options can be seen in this video:
To summarize, a person will need to do:

• marking walls;
• gating;
• pipe laying;
• installation of communications, adapters, valves;
• facing works of new walls;
• connecting the mixer and hose;
• holder fastening;
• adjusting the thermostat, if equipped.

The lack of experience in carrying out at least one of these types of work suggests that it is better to contact a specialist with installation questions. Improperly carried out work can lead to a water breakthrough, flooding of neighbors, and, as a result, compensation for the damage caused.

THIS IS INTERESTING

People often call this device a “paperless toilet” because inside the bidet bowl there is a small fountain that supplies a stream of water. Since taking a shower after visiting the toilet is not always possible, a bidet is an excellent alternative for carrying out such procedures.

The bidet is connected to hot and cold water, the temperature of which can be adjusted using a mixer. As a rule, the bidet is always installed in close proximity to the toilet. Like any other plumbing device, a bidet requires regular maintenance, i.e. cleaning. If the bidet looks very much like a toilet, then in its functionality it is similar to a washbasin or bathtub.

There are many different designs and variations of the device, for example, there are models that have one hole for filling with water, and there are bidets with two holes. The bidet tank itself can be made of earthenware or porcelain. Also, if desired, while using the device, you can close the hole with a lid so that the sink fills with water.

There are various types of mixers that provide a person with the ability to adjust the direction of the stream, as well as the strength of its flow. Also, now there are models that not only perform the function of washing the skin, but also drying it after a hygiene procedure.