Free expert consultation
Seliverstov Alexander Nikolaevich
Specialist in working with customers
Phone: +7(499)499-49-39
Email:
So, the main component of the tank of this sample is a combination of polymers that have the highest possible strength. Over the past year, this material has quickly gained popularity. It replaced many strong products, and most importantly replaced its other analogues, which of course made the life of consumers easier. In this case, the polymer is presented in the form of a standard type of polyethylene. There are cases when manufacturers try to make the product even stronger. In our case, this can be achieved by increasing the rigidity of the metal lattice. The lathing of this format should be located outside the entire product. In order for the structure to survive the winter as efficiently as possible, a special tray is attached to its bottom.
Due to the fact that the material is of a modern type, it is extremely light, which allows the entire product to weigh around several tens of kilograms. The plastic container includes a neck and a lid, which makes it easy to pour liquid into it, and this is also facilitated by the presence of a special type of valve. This, in turn, helps ensure that at least a small amount of air enters the product. In this case, much depends on the material that will be transported. The design also includes a flanged ball valve, which helps drain the contained liquid. The diameter of such a tap is about 30 cm.
Eurocube - types
Today, the market offers many models of Eurocubes, which have different dimensions, material and volume. But, despite these features, it is still possible to highlight the general characteristics of these units:
- Outer packaging. Most often, it has a rigid base and is made in the form of a sheathing and a pallet made using steel. Some models may have a wooden or plastic tray. The purpose of a particular device is of decisive importance here.
- Form. The vast majority of these products are made in the form of a cube.
- Material. To manufacture the Eurocube, durable high-density low-density polyethylene is used, and most often it is PE 100.
- Wall thickness. The proposed Eurocubes may have walls whose thickness can be in the range of 1.5-2 millimeters, which is also determined by the purpose of the product.
- Color. The traditional design is white, but if desired, this structure can be painted in any other shade.
- Tap. Most often, containers are equipped with a piston valve, the disadvantage of which is a shorter service life.
Depending on their purpose, Eurocubes can be classified into the following types:
- food. They are used for food storage purposes, the latter usually being ethyl alcohol, vinegar, oil, etc.;
- technical. They serve as a container for storing and transporting substances such as alkalis, acids, fuel, etc.
In our country, a limited number of companies are engaged in the manufacture of such products. However, even such a small assortment ensures them great popularity among consumers. The reason for this is ease of use and great functionality.
Paralysis of the left side of the body after a stroke and its treatment
Have you been struggling with HYPERTENSION for many years without success?
Head of the Institute: “You will be amazed at how easy it is to cure hypertension by taking it every day.
The consequences of strokes, in which different hemispheres of the brain are affected, have significant differences and require different therapeutic and rehabilitation measures. If the lesion is in the right hemisphere, then paralysis of the left side of the body occurs. This type of stroke is more difficult to diagnose because the patient remains speechless. In this regard, there is a danger of late diagnosis, so recovery of the left side of the body is more difficult and takes longer. Early diagnosis and treatment are very important: if first aid is provided and the patient is taken to hospital within the first three hours, a stroke can have minimal consequences.
Signs of a right-sided stroke
The leading symptom of a stroke with a lesion in the right hemisphere is paralysis of the left side of the body. The main features are as follows:
Our readers successfully use ReCardio to treat hypertension. Seeing how popular this product is, we decided to bring it to your attention. Read more here...
- Impaired functioning of the facial muscles. In a right-sided stroke, the left corner of the mouth and the outer corner of the left eye droop.
- The left side is partially or completely paralyzed. There is a dysfunction of the musculoskeletal system and internal organs located on the left side.
As already mentioned, speech disorders are not observed, since the left half of the brain is responsible for this function. For this reason, the diagnosis is often made late, treatment is not prescribed in a timely manner, and the following clinical picture develops:
- Left eye paralysis.
- Hearing impairment.
- Impaired perception of the left side of the body. This may include determining the size of an arm or leg, as well as the distance to them. In addition, the left limbs and fingers do not obey.
If the left side is paralyzed, it means that the blood supply to the right hemisphere, which is responsible for emotions, creative inclinations, abstract thinking, and the integration of accumulated information, is impaired. Therefore, this condition is characterized by the following symptoms:
- Loss of orientation in space, absent-mindedness.
- Memory loss, partial loss of hearing, vision, touch.
- Inexplicable aggression, depressive states, inappropriate reactions and behavior, carelessness.
- Non-perception of colors.
Both hemorrhagic and ischemic strokes are characterized by some common symptoms: impaired consciousness, dizziness, vomiting, sudden headache, and difficulty breathing.
Brain symptoms are more pronounced in hemorrhagic stroke, which is explained by the effect on brain tissue of blood leaking from a burst vessel. The patient experiences severe headaches, sometimes with loss of consciousness, severe nausea, frequent vomiting, and severely impaired consciousness.
Ischemic stroke has less pronounced cerebral symptoms. In this case, neurological manifestations predominate, which depend on the location of the lesion.
If the motor center located in the area of the central gyri of the brain is affected, then paralysis or paresis develops, that is, one or both left limbs may be completely immobilized, or movements may be partially impaired.
If the focus is concentrated in the parietal region, sensory disturbances are observed, in which the sensations of pain, heat, and cold are absent or impaired on the left side.
Paralysis of the left side leads to disturbances in spatial perception. The patient cannot estimate the distance to objects and their sizes, this also applies to his own body. In addition, the perception of time and body diagram is disrupted, the patient ignores the left half of space.
You should know that if the right hemisphere of the brain is damaged, left-handers may not experience such signs.
Right-sided stroke in the elderly has its own characteristics due to advanced vascular diseases. This is slow thinking, deterioration of memory and attention, narrowing of the range of interests. Treatment and recovery in this case is difficult and progresses very slowly.
Difficulties in treatment and recovery after stroke with left-sided paralysis
Patients who have suffered a stroke, which resulted in left-sided paralysis, are passive in relation to rehabilitation measures, since their perception of their own body is distorted. They do not feel motor disturbances, do not strive for recovery, and the period of immobility is more protracted. With such indifference of the patient, rehabilitation is difficult, the recovery period after a stroke is too long, and the effectiveness of the measures is reduced because of this.
For cognitive impairment, nootropil, cerebrolysin, gliatilin, as well as some antidepressants without sedation, such as fluoxetine, imipramine, are prescribed.
Rehabilitation measures after a stroke consist of massages, therapeutic exercises, and physiotherapeutic procedures. Invaluable help can be provided by loved ones who will constantly encourage the patient to undergo treatment. A right-sided stroke requires the mandatory intervention of a psychotherapist.
In terms of its design, the Eurocube is a polymer-based container, which is made in the shape of a cube. It is no coincidence that these products are often used in various facilities, including car washes, construction sites and oil and chemical industry facilities. The reason for this is due to the high strength characteristics of the material used for this design. At the same time, ordinary citizens often resort to this device.
Scope and method of application of the Eurocube
Eurocube - this name is more understandable to ordinary consumers. Officially, it is called an IBC container . This is due to the fact that it was originally created to transport liquids, primarily ordinary and aggressive ones.
Such plastic containers are unique products and are superior in such parameters as ease of transportation of bulk substances and liquids to all other similar products.
A Eurocube with a capacity of 1000 liters is considered quite universal, which can be used by both large companies and ordinary citizens.
Among the advantages that these containers have is their amazing strength. At the same time, such structures are not susceptible to the negative effects of any aggressive chemicals and withstand atmospheric influences . What allows them to demonstrate such qualities is the blowing method used in manufacturing, which among technologists is called rotomolding.
In some cases, this container can be reused, but it must be borne in mind that if the first time it served as a container for transporting harmful chemicals, then the next time it is used, it is not advisable to use it as a container for watering the garden. As harmful substances are present in the Eurocube, they gradually penetrate into the plastic, which is why the water transported in it can negatively affect human health.
It is preferable to use a container that was used to transport non-aggressive liquids. Washing allows you to quite well remove the remnants of the previous contents; as a result, the container can also serve for the purpose of transporting water intended for domestic needs.
If you have a need for such a container, then there is no need to buy a new Eurocube. You can always find those who are willing to sell a used product. This will allow you to save money, and this will not affect the efficiency of using such a container. If you want to purchase a new product, then remember that the cost of a Eurocube from the manufacturer will be quite high.
What kind of tank should there be for arranging irrigation in a country house?
Remote summer cottages are often cut off from the central water supply system, which makes caring for the crops much more difficult. Plants require abundant watering throughout the season, especially in hot and dry weather. If it is quite problematic to equip a well on the site, you can create your own storage facility where water will be accumulated and saved.
Anyone can afford to install an irrigation tank on their property. With its help, timely watering is organized, and a prototype of a water supply system is created, which allows the liquid to be used for various purposes.
Use of used Eurocubes on the farm
These products have gained great popularity due to their convenience, versatility and unusually long service life. If you are the owner of a summer house or country house, then it will not hurt you to have an additional capacity of 1000 liters . A similar container will be useful for any summer resident, since in this case he will be able to save himself from the hard work of lifting water from a well used for irrigation. Most often, the Eurocube is used on the farm to solve the following problems:
Watering the garden
If you plan to use a Eurocube for watering, then in addition to this container you need to purchase a pump. This plastic container will have to be placed at a certain height, and you will not have any difficulties lifting it, since the material used for its manufacture is lightweight, so you can easily lift it together. You can use a pump to fill the barrel with water.
If you have enough time, you can fill the container with water using a water tap , to which you need to connect a hose, after which the free end is immersed in the hole from above. If you cannot wait for the barrel to be filled with water, then you need to connect the pump to the faucet, as a result, it will immediately begin supplying water to the place where you plan to use it for irrigation.
Summer shower
Such a container also allows for rapid heating of water. The reason for this is the special material from which the container is made. If it's warm enough outside, it will only take you a couple of hours for the water to warm up to a comfortable temperature for swimming.
In this case, the Eurocube can serve you as a summer shower cabin without a tray. To do this, it is enough to place this container at a certain height, securing it to a strong iron structure. You can use a hose and pump to supply water to it. By providing a faucet in the design , you will simplify the procedure for opening and closing the flow of water. You can use a container with heated water not only for taking a shower, but also for washing various things, including dishes.
Construction of a septic tank
Eurocube can quite successfully fulfill the role of a septic tank, for the construction of which you do not have to spend a lot of effort and money.
Water for everyday needs
If you own a personal vehicle, then you probably often have to wash your car, paying quite a lot of money for it. Having a dacha or country house allows you to save on this procedure. At the same time, many of us have other water needs. For example, a Eurocube can solve the problem of filling a pool, for which it is enough to have a pump. If you often have to water your area using water from a well or well, then the Eurocube will do an excellent job as a storage tank for water.
What materials are storage containers made from?
Containers for storing and supplying water are presented on the market in various versions and are made of metal or durable plastic. When buying a container for watering for a long time, you should consider what material it is made of. Modern polymers make it possible to create very durable products with high technical characteristics. They can surpass their metal counterparts in quality and strength.
Metal storage tank
A tank made of this material is a classic option, familiar to most summer residents. Iron products have been used to store liquids for many years. Everyone who works in the country and uses an artificial storage device made of metal knows about all its disadvantages:
- susceptibility to corrosion;
- rapid contamination;
- difficult care.
It is quite difficult to protect a metal tank from destructive corrosion. To maintain its integral appearance from the outside, it is enough to paint the surface. But inside the water will create a constant impact that destroys the metal. Within a couple of months, sediment will form at the bottom of such tanks. Internal cleaning is a difficult task. The positive side is the good heating of the barrel and its contents under the rays of the sun.
You can maintain the integrity of the inside of the tank by using a plastic lining. This is the only option. However, such an expensive undertaking is not available to everyone.
An alternative solution would be to purchase a stainless steel product that does not have these disadvantages. This also applies to the option with high financial costs.
VIDEO: Irrigation barrel, making a stand
Durable plastic
Purchasing an irrigation tank of 500 liters or more is a reasonable decision, based on the fact that they do not have the disadvantages of metal structures. Such products are made of high-tech plastic, which allows them to withstand heavy loads. Unlike cheap plastic, they are not afraid of temperature changes. Integrity is also maintained under the influence of high water pressure.
Plastic container for watering
One of the main advantages of plastic tanks is their light weight. They are easy to transport and install in the required location. You can install the plastic structure yourself without special equipment.
To prevent the tank from bursting when the water freezes in winter, either drain it completely, or throw a large log or plastic 5-liter bottles inside, which completely cover the surface.
To make a large-volume watering container, it is additionally reinforced with special metal rings. This design makes the final product resistant to water pressure. The next advantage of products made from plastic is price. It is more affordable than metal analogues. The manufacturing technology of plastic containers allows us to offer the buyer containers of various shapes:
The shape of the container does not affect the quality of irrigation. The main thing is that it succinctly fits into the surrounding landscape and is convenient for installation.
1 cubic meter storage tank where rainwater is drained
The Eurocube has a cubic-shaped structure, reinforced on the outside with a durable metal lattice. The container is installed on a special pallet. This is an excellent option for organizing a drip irrigation system with the addition of fertilizers. It is designed for one cubic meter of water. The design includes a screw-on lid and a tap for draining liquid located at the bottom. To protect against rupture, the same technology is used as described above.
How to calculate the volume of an irrigation tank
If, when making a metal container, you can independently determine the volume in advance - from 1 to 10 cubic meters (the supports may not support a larger volume), then buy a plastic one ready-made. In general, the storage volume depends on the area of the irrigated area. On average, 1 square uses about 30 liters of water per watering. Thus, if the area of the garden or plot is 50 sq.m., then the minimum volume of the tank will be 1.5 cubic meters (1500 liters), and a supply of water must be made.
Gardeners on plots of 6 acres usually install 3-cubic-meter containers, which is enough for a week’s watering.
Installation of watering tanks
All the positive characteristics of tanks for storing and supplying water for irrigating plants are neutralized by poor-quality installation and location. Therefore, it is important to correctly place and install the watering container on the site. The storage tank must be located in a place where rainwater drains. This is the easiest way to replenish this resource without any effort. Rainwater is the most beneficial for plants.
Rainwater storage tank
It is necessary to determine where the barrel will stand:
- underground;
- on a surface;
- on a special platform.
Mounting the product in a suspended state allows you to install a faucet and, by connecting a hose to it, obtain pressure from the water’s own weight. Otherwise, a pump is installed that supplies water from the barrel.
For reference! To create the optimal water column pressure for the required pressure, you need to raise the tank to a height of two meters. This will result in a pressure of 0.2 atmospheres. It is advisable to make it higher, but you need to think carefully about how to make a stable pedestal and how to give it optimal rigidity.
Technical advantages of using a tank for irrigation of a garden
Using a pump to lift water from a well is sufficient to meet household needs. However, their power may not be enough to supply liquid to the planted area. Inexpensive pumps are not able to operate under pressure of 3-4 bar. The pump will operate at its maximum capacity, but will not create optimal conditions for irrigation.
If an irrigation tank is installed on the site, this problem will be solved. Gradually, the pump will pump the required amount of liquid for abundant irrigation of all plants. There is no need to create high pressure to ensure that water from the barrel enters and flows through the hoses. Automatic protection installed on the equipment will turn off the pump when the water runs out.
To protect the pump from constant shutdown or possible breakdown, it is necessary to set a level to which the water will again flow into the tank. You can protect yourself from overflow using a float valve.
Typical Eurocube sizes
The Eurocube differs little from most other containers, which fully applies to its dimensions, which meet certain standards. If you are thinking of purchasing such a container, then before making a final decision, we recommend that you pay attention to the top and bottom of this product: there you can see its dimensions, based on which you can easily understand whether this container meets your requirements or not. The 1000 liter Eurocube, which is popular among most consumers, has the following dimensions.
Dimensions of 1000 liter container:
- Length - 1200 +/- 10 mm.
- Width - 1000 +/- 10 mm.
- Height - 1160 +/- 10 mm.
- Volume - 1000 liters (maybe 50 liters more, this is quite acceptable).
- Weight - 53 +/- 10 kg.
The vast majority of companies involved in the production of Eurocubes pay great attention to maintaining the dimensions of these containers. For this reason, any consumer who is interested in such containers will find it quite easy to determine how many containers he will need to solve a particular problem.
Water level
Having seen that there is a displacement marking on the cube, it was decided to use it.
I bought a silicone tube (2 meters) - 30 or 40 rubles. it worked out. I picked up a plastic ball (from a children's bracelet) for it. I dismantled the standard tap from the Eurocube, screwed a cheap plastic hose connector into its plug, and installed a rubber gasket. One part of the connector is made narrower so that the ball does not slip into the cube when it is empty. The hose was laid near the markings, pulled to the cube mesh with plastic ties. The end of the hose was simply bent down. This is the picture we got.
The cube is filled up to 800 liters. Nothing drips Beauty!
Site layout
Let's consider a drip irrigation system for small gardens and do-it-yourself plots. This will allow you to avoid the use of expensive controllers and water supply pumps, and will also make it possible to develop an ideal watering scheme for your beds.
One of the most important aspects is planning your site. In order to correctly calculate the amount of consumables, you should make a diagram of the site, planned beds and irrigation sites, taking into account all buildings, communications and paths.
Drip irrigation by gravity - a minimum of hassle and good savings!
Drip irrigation on a commercial scale was first used in Israel in the early 60s of the last century. There was a program to save irrigation water. In the first year, the harvest increased 1.8 times, which gave impetus to the development and research of this agricultural direction.
In the CIS, due to the lack of effective filtration systems, drip irrigation has not found widespread use and was used only in Moldova and Crimea.
Modern technologies in the production of inexpensive and durable materials allow you to create such an irrigation system in your gardens and achieve maximum yield from several acres of land, without the help of specialists and without large financial investments.
